Power Supplies
They can be connected to 100 to 265 volts AC using from 47/63Hz sources. The output is 12-volts dc.
The input and outputs are clearly marked on the supplies. The input is connected to the AC mains from the house. The output is connected as follows: Red (+12) connected to the gray wires on the characters and black (-12) connected to the white wires. The characters/numbers should never be connected directly to the AC power of the house.
The power supplies are IP67 waterproof rated.
OUTPUT |
DC VOLTAGE |
12V |
24V |
36V |
RATED CURRENT |
2.0 AMP |
1.0 AMP |
0.66AMP |
RATED POWER |
24W |
24W |
24W |
INPUT |
VOLTAGE RANGE |
100 ~ 265VAC |
|
|
FREQUENCY RANGE |
50~60HZ |
|
|
AC CURRENT (TYP) |
3.5A/110, 220VAC |
2.0A/110, 220VAC |
1.5A/110, 220VAC |
PROTECTION |
Short Circuit |
Protection type : recovers automatically after condition is removed |
Overload |
Overload protected @ 145-160 above peak rating |
Over Temperature |
Potection type : Shutdown o/p voltage, re-power on to removed |
ENVIRONMENT |
WORKING TEMP |
-30~ ‘+50 C (Refer to output load derating curve) |
WORKING HUMIDITY |
20~99% RH non-considering (Waterproof) |
STORAGE TEMP., HUMIDITY |
-40~80 C, 1099% RH |
SAFETY STANDARDS |
ROHS/CE MARK (EMC,LVD), IP67 |
WITHSTAND VOLTAGE |
I/P-O/P : 1.5KVAC IP-GND : 1.5KVAC |
SAFETY & EMC |
NOTE |
All parameters NOT specifically mentioned are measured at 110V, 220 VAC input, rated load and 25C of ambent temperature |
OUTPUT |
DC VOLTAGE |
12V |
24V |
36V |
RATED CURRENT |
2.0 AMP |
1.0 AMP |
0.66AMP |
RATED POWER |
24W |
24W |
24W |
INPUT |
VOLTAGE RANGE |
100 ~ 265VAC |
|
|
FREQUENCY RANGE |
50~60HZ |
|
|
AC CURRENT (TYP) |
3.5A/110, 220VAC |
2.0A/110, 220VAC |
1.5A/110, 220VAC |
PROTECTION |
Short Circuit |
Protection type : recovers automatically after condition is removed |
Overload |
Overload protected @ 145-160 above peak rating |
Over Temperature |
Potection type : Shutdown o/p voltage, re-power on to removed |
ENVIRONMENT |
WORKING TEMP |
-30~ ‘+50 C (Refer to output load derating curve) |
WORKING HUMIDITY |
20~99% RH non-considering (Waterproof) |
STORAGE TEMP., HUMIDITY |
-40~80 C, 1099% RH |
SAFETY STANDARDS |
ROHS/CE MARK (EMC,LVD), IP67 |
WITHSTAND VOLTAGE |
I/P-O/P : 1.5KVAC IP-GND : 1.5KVAC |
SAFETY & EMC |
NOTE |
All parameters NOT specifically mentioned are measured at 110V, 220 VAC input, rated load and 25C of ambent temperature |
< Back to Products Page